Maintenance of High and Low Temperature Impact Test Chamber

The high and low temperature test chamber adopts a unique structural design method, which is an integrated plane design method, and the two sides of the high and low temperature test chamber are molded into an arc shape. The equipment adopts a new type of cooling machine layout method, optimizes the turbine air outlet and motor heat dissipation and other links, improves the stability of the equipment, prolongs the service life, and has a more beautiful appearance.

When using the high and low temperature test chamber, please maintain and maintain it in the following ways:

1. Keep the appearance of the high and low temperature test chamber clean and tidy at all times.

2. Do not place objects on the top of the machine, in order to facilitate the heat dissipation of the motor and control parts, and avoid danger.

3. The high and low temperature test chamber equipment has been used for a long time. If abnormal noise occurs in the motor blower device, door lock hinge and other parts, it should be checked, and attention should be paid to frequent cleaning and refueling.

4. If the electrical components of the high and low temperature test chamber are overheated, the cause must be checked immediately.

5. After each use, the high and low temperature test chamber should be kept clean to prevent corrosion.

6. The control cabinet of the high and low temperature test chamber should be cleaned once a month to prevent excessive dust from affecting the normal operation of the equipment.

7. After the test of the high and low temperature test chamber is completed, the main power supply and air source should be turned off, and the condensed water traces in the working room should be wiped off, and the high and low temperature test chamber should be kept in a dry environment as much as possible.

8. If the electrical components on the control panel of the high and low temperature test chamber need to be replaced, do not disassemble them indiscriminately to ensure the service life of the high and low temperature test chamber.

9. Please clean up the dust on the surface of the condenser of the refrigeration system of the high and low temperature test chamber every 3 months, and keep it ventilated to facilitate the refrigeration operation.

10. Observe the oil position of the compressor in the high and low temperature test chamber from time to time, and if the oil level is found to be too low or too high, please contact the maintenance personnel in time, and normal use can only be done after troubleshooting.

11. The transmission chain of the high and low temperature test chamber should be lubricated to a certain extent (please use special lubricating oil for high temperature resistance) to avoid rust in long-term use.

12. Always observe the oil level in the oil-water separator of the high and low temperature test chamber. When the oil level is low, add lubricating oil in time (air compressor oil can be used)

Guangdong Yuanyao Test Equipment Co., Ltd. is an ISO9001:2015 certified manufacturer and trader specializing in the research and development and production of environmental testing equipment such as environmental test chambers. Welcome to consult.